K-HEALTHinAIR indoor and outdoor air quality sensor data and analysis
Collection · 5 partsField5 parts
Indoor and outdoor sensor data from the Austrian pilot's homes and schools, March 2023 to March 2025, with preprocessing, clustering and VOC analysis notebooks.
Access
Licence
GPL-3.0+Copyleft open-source licence: use and change it freely, but share any distributed changes under the same licence.
Size
895 MB · 15 CSV files; 2023-2025
Formats
CSV
How to cite
Mediavilla-Martinez, C. (2026). K-HEALTHinAIR indoor and outdoor air quality sensor data and analysis [Data set]. Zenodo. https://www.urbanfluidmechanics.org/data-portal/k-healthinair-indoor-and-outdoor-air-quality-sensor-data-and-analysis/
Check the repository for the citation its authors prefer.
Three months of 5-minute CO2, temperature, humidity, motion and window/door status data from two office rooms in Graz, Austria, plus source code. Useful for linking window opening, occupancy and CO2 dynamics.
One-minute BMS time series covering zone temperature, CO2, setpoints and actuator signals, plus hourly electricity data, from schools, medical centres, care facilities and a sports arena, 2022-2025. Useful for ventilation and indoor air quality analysis and for data-driven HVAC control.
Over 2.6 million one-minute records from 6 LoRaWAN nodes in a university office building, with CO2, PM2.5, temperature, humidity and pressure alongside radio propagation metrics. Usable for indoor CO2 and ventilation analysis.
A year of 10-minute data from 11 social-rental dwellings: CO2, TVOC, temperature, humidity and pressure, plus PIR and door activity, radiator valves, electricity, gas and weather. Useful for residential CO2 and ventilation behaviour studies.
Ten-minute indoor CO2, temperature, humidity, formaldehyde, TVOC and PM from 84 homes around Rotterdam, January 2024 to April 2026. Useful for ventilation and IAQ analysis in dwellings.
Field CO2 and PM2.5 measurements in a 71 m3 occupied office, with PINN training/analysis code and weights used to derive air change rate, penetration factor and field CADR. Useful for ventilation-rate inference and indoor particle modelling.