SAMHE: CO₂, particulates and temperature in about 2,000 UK classrooms
FieldOn request
Classroom air quality from the SAMHE schools network. Sensors in about 2,000 UK classrooms log CO₂, particulate matter, volatile organic compounds, temperature and humidity. The CO₂ records show how well classrooms are ventilated through the school day.
Access
Available on application to the SAMHE project team; see the methods paper.
Licence
Not stated: check the repository before reusing the data.
Size
about 2,000 classrooms
How to cite
Stockholm Environment Institute, University of York. (2023). SAMHE: CO₂, particulates and temperature in about 2,000 UK classrooms [Data set]. https://www.urbanfluidmechanics.org/data-portal/samhe-schools-air-quality-monitoring/
Please also cite the publication below that describes it.
Indoor and outdoor sensor data from the Austrian pilot's homes and schools, March 2023 to March 2025, with preprocessing, clustering and VOC analysis notebooks.
One-minute BMS time series covering zone temperature, CO2, setpoints and actuator signals, plus hourly electricity data, from schools, medical centres, care facilities and a sports arena, 2022-2025. Useful for ventilation and indoor air quality analysis and for data-driven HVAC control.
Over 2.6 million one-minute records from 6 LoRaWAN nodes in a university office building, with CO2, PM2.5, temperature, humidity and pressure alongside radio propagation metrics. Usable for indoor CO2 and ventilation analysis.
A year of 10-minute data from 11 social-rental dwellings: CO2, TVOC, temperature, humidity and pressure, plus PIR and door activity, radiator valves, electricity, gas and weather. Useful for residential CO2 and ventilation behaviour studies.
Ten-minute indoor CO2, temperature, humidity, formaldehyde, TVOC and PM from 84 homes around Rotterdam, January 2024 to April 2026. Useful for ventilation and IAQ analysis in dwellings.
Field CO2 and PM2.5 measurements in a 71 m3 occupied office, with PINN training/analysis code and weights used to derive air change rate, penetration factor and field CADR. Useful for ventilation-rate inference and indoor particle modelling.