Wind-tunnel pressure-tap processing script for building pressure coefficients
Lab2 MB
A Python script that converts raw wind-tunnel pressure-tap data into wind pressure coefficients, flags sensor errors and writes Surfer-ready grids, surface-averaged Cp and a processing report. Example input and output are included.
CC BY 4.0Free to use and share, including commercially, as long as you credit the creators.
Size
2 MB
How to cite
Medinilha-Carvalho, T. A., Silva, F. V. M. D., Bre, F., Gimenez, J. M., & Labaki, L. C. (2023). Automated Data Processing Script for Wind Tunnel Measurements in Python [Computer software]. Zenodo. https://doi.org/10.5281/zenodo.8247854
Check the repository for the citation its authors prefer.
Stereo PIV and surface pressure measurements around an idealised cubic building with and without vertical openings, under high- and low-shear boundary-layer inflow. Useful for validating near-building flow and ventilation simulations.
Surface-averaged and local Cp statistics from 1,260 RANS simulations covering 180 parameterised H-shaped low-rise buildings and 24 wind directions. Useful for airflow network models of natural ventilation and for surrogate modelling.
Input geometries and wind pressure coefficient results from CpSimulator, a cloud-based platform for predicting Cp on buildings. Useful for natural ventilation and wind-load studies.
Raw wind pressure coefficient (Cp) data and ventilation/energy simulation results for three scenarios comparing isolated buildings with buildings in an urban surrounding. Useful for setting Cp boundary conditions in natural ventilation and airflow-network models.
Indoor–outdoorSimulationSimulation outputMultizone model
CFD simulations of cross-ventilation in a generic isolated building with five roof angles and varied outlet heights. Useful for building aerodynamics and ventilation model validation.
From Zenodo, added 2026-11-15.
Listed there as “Automated Data Processing Script for Wind Tunnel Measurements in Python”. Tags proposed by AI and not yet checked by hand. Spotted a mistake? Tell the portal contacts.