OpenFOAM validation cases for room airflow and data-centre cooling
BenchmarkSimulation4 MB
OpenFOAM cases and scripts reproducing classic indoor airflow validation experiments (Wang and Chen 2009; Zhang et al. 2007) with several turbulence models, plus data-centre efficiency cases. Useful for validating indoor RANS models.
CC BY 4.0Free to use and share, including commercially, as long as you credit the creators.
Size
4 MB · 10 files
How to cite
Dogan, A., Yilmaz, S., Kuzay, M., & Demirel, E. (2022). OpenFOAM cases of the paper "Development and validation of an open-source CFD model for the efficiency assessment of data centers [Data set]. Zenodo. https://doi.org/10.5281/zenodo.6336674
Check the repository for the citation its authors prefer.
193 steady RANS (k–ε, Boussinesq) simulations of one 8.8 × 6.1 × 3.2 m furnished room where only the positions of three supply and three return ceiling vents change. Each case gives cell-centre temperature, velocity and pressure plus boundary-patch data. Useful for training neural-operator surrogates and for studying how diffuser layout affects HVAC airflow.
Complete case set-ups for two solvers, the shared 2.66M-cell mesh, converged 3D fields, digitised experimental profiles and post-processing scripts for an underfloor air-distribution room with heated manikins. Useful for validating buoyancy-driven indoor CFD.
Steady RANS velocity field (cell-centred, VTK/VTU) for an empty 8 x 7 x 3 m room with a ceiling supply and a ceiling extract at 0.36 m3/s. It is the ground truth for the Open AirField benchmark, which tests reconstruction of room airflow from sparse point measurements.
Experimental temperature data, STL geometries and OpenFOAM case setups and results for an air-cooled data centre, before and after retrofit. Useful for validating CFD of cooling airflow in technical rooms.
Processed URANS outputs (regional temperature rise, passive tracer, mean-field sections), surrogate models, reference geometry, input dictionaries and analysis code comparing fan allocations at equal power in a normalised industrial hall. Useful for industrial ventilation design and surrogate modelling.
Air velocities measured on an HTM 03-01 grid at 1 m and 2 m below the canopy (three repeats), processed means and uncertainties, and the CAD geometry. Useful for validating CFD of ultra-clean ventilation airflow and particle entrainment.
From Zenodo, added 2026-11-15.
Listed there as “OpenFOAM cases of the paper "Development and validation of an open-source CFD model for the efficiency assessment of data centers"”. Tags proposed by AI and not yet checked by hand. Spotted a mistake? Tell the portal contacts.