Data portal · Topic
HVAC and building services airflow datasets
Airflow data and tools for mechanically ventilated spaces: supply and extract performance of HVAC and air-handling units, diffuser and displacement-ventilation flows, data-centre and technical-room cooling, and multizone and airflow-network models.
- 26 resources
- 11 field
- 11 simulation
- 4 tools & geometry
- 3 benchmarks
All 26 resources, largest first
Nothing on this page for that setting. Show all 26.
-
Simulation outputs and MATLAB scripts for 192 cases of a dwelling with a façade-integrated AHU with thermoelectric heat exchange. Covers ventilation, IAQ, overheating and energy across four climates.
Indoor Simulation Simulation outputSoftware & tools Multizone model
-
193 steady RANS (k–ε, Boussinesq) simulations of one 8.8 × 6.1 × 3.2 m furnished room where only the positions of three supply and three return ceiling vents change. Each case gives cell-centre temperature, velocity and pressure plus boundary-patch data. Useful for training neural-operator surrogates and for studying how diffuser layout affects HVAC airflow.
Indoor Simulation Simulation output RANSML / surrogate
-
Complete case set-ups for two solvers, the shared 2.66M-cell mesh, converged 3D fields, digitised experimental profiles and post-processing scripts for an underfloor air-distribution room with heated manikins. Useful for validating buoyancy-driven indoor CFD.
Indoor Benchmark Simulation Case setupSimulation outputGeometry RANS
-
Steady RANS velocity field (cell-centred, VTK/VTU) for an empty 8 x 7 x 3 m room with a ceiling supply and a ceiling extract at 0.36 m3/s. It is the ground truth for the Open AirField benchmark, which tests reconstruction of room airflow from sparse point measurements.
Indoor Benchmark Simulation Simulation outputCase setup RANS
-
OpenFOAM cases and scripts reproducing classic indoor airflow validation experiments (Wang and Chen 2009; Zhang et al. 2007) with several turbulence models, plus data-centre efficiency cases. Useful for validating indoor RANS models.
Indoor Benchmark Simulation Case setupSimulation output RANS
-
3D models and measurements of air speed, air temperature and server power at 1-10 s intervals in a small server room, under idle to 100% load scenarios. Useful for validating CFD of data-centre cooling airflow.
Indoor Field MeasurementsGeometry Indoor sensors
-
Building management system, CO2 and energy data from seven public buildings in Ålesund (COLLECTiEF)
6.6 GBOne-minute BMS time series covering zone temperature, CO2, setpoints and actuator signals, plus hourly electricity data, from schools, medical centres, care facilities and a sports arena, 2022-2025. Useful for ventilation and indoor air quality analysis and for data-driven HVAC control.
Indoor Field Measurements Indoor sensors
-
OpenFOAM case files, scripts and results for steady k-omega SST simulations of air flow through an OCP Leopard server, with and without fan blades, at a range of inlet flow rates. Useful for server-level airflow models in data-centre cooling studies.
Indoor Simulation Case setupSimulation output RANS
-
Experimental temperature data, STL geometries and OpenFOAM case setups and results for an air-cooled data centre, before and after retrofit. Useful for validating CFD of cooling airflow in technical rooms.
Indoor Field MeasurementsSimulation outputCase setupGeometry RANSIndoor sensors
-
STL geometry of a computer simulated person, built from 3D scans of the ANDI thermal manikin, for CFD of human heat transfer, thermal plumes and occupant-centred HVAC studies.
Indoor Tools & geometry Geometry
-
Processed URANS outputs (regional temperature rise, passive tracer, mean-field sections), surrogate models, reference geometry, input dictionaries and analysis code comparing fan allocations at equal power in a normalised industrial hall. Useful for industrial ventilation design and surrogate modelling.
Indoor Simulation Simulation outputCase setupSoftware & toolsGeometry RANSML / surrogate
-
Air velocities measured on an HTM 03-01 grid at 1 m and 2 m below the canopy (three repeats), processed means and uncertainties, and the CAD geometry. Useful for validating CFD of ultra-clean ventilation airflow and particle entrainment.
-
CAD geometry and simulation-ready models for four windcatcher shaft designs for natural ventilation CFD. Useful as case setups for building ventilation studies.
Indoor–outdoor Simulation GeometryCase setup RANS
-
Laboratory office-room measurements of CO2 in the room and in supply/exhaust ducts, plus temperature, humidity, pressure, variable VAV airflow and ground-truth occupant counts. Useful for ventilation-rate estimation and demand-controlled ventilation.
Indoor Field Measurements Indoor sensors
-
Air velocity measurements above an operating table in a laboratory operating room with mixing and unidirectional ventilation, varying patient/staff presence and supply temperature. Useful for validating operating-room airflow CFD.
Indoor Field Measurements Indoor sensors
-
Web-based interactive CFD tool that computes temperature and airflow fields in auditoriums for early-stage HVAC and thermal comfort assessment.
Indoor Simulation Software & tools RANS
-
Case-by-case processed results for indoor temperature, CO2, particulate matter and energy use under different ventilation scenarios in a school kitchen, for comparing ventilation strategies.
Indoor Field Measurements Indoor sensors
-
Results from coupled CONTAM/EnergyPlus co-simulations of zoned smart ventilation strategies in new California dwellings. Covers ventilation energy and occupant exposure to CO2, moisture, particles and a generic contaminant.
Indoor Simulation Simulation output Multizone model
-
Temperature, humidity and CO2 measured at eight points on child and adult breathing planes in a day-care classroom. Eight tests cover combinations of ventilation, conditioning and air cleaning, for assessing indoor air quality and ventilation performance.
Indoor Field Measurements Indoor sensors
-
CFD of transient virus-laden particle recirculation and filtration in a room, with airflow patterns and dispersion.
Indoor Tools & geometry Simulation output
-
Steady-state measurements on a full-scale single-storey double-skin facade with venetian blinds, run in outdoor-air-curtain and supply-air modes at several ventilation rates under winter and summer boundary conditions with a solar simulator. Contains cavity temperatures, airflow and heat-flux data for validating facade airflow and thermal models.
Indoor Field Measurements Indoor sensors
-
CFD of airflow, particulate dispersion and ventilation efficiency in a portable cleanroom. Useful for cleanroom ventilation design.
Indoor Tools & geometry Simulation output
-
Transient CFD results for 9 scenarios (3 server power levels × 3 cooling setpoints) of a 4.86×4×3 m server room with two racks and a ceiling cooling unit. Useful for data-centre cooling airflow studies.
Indoor Simulation Simulation output RANS
-
One-week time-resolved PM2.5, NO2, formaldehyde and CO2 plus measured range hood and exhaust fan airflows in 23 apartments with gas cooking. Useful for studying ventilation performance and indoor pollutant dynamics in homes.
Indoor Field Measurements Indoor sensors
-
Experimental particle concentration distribution in a residential room under radiator and floor heating.
Indoor Field Measurements
-
CFD of velocity, turbulence and temperature in a small occupied office with double-panel and ventilation radiators.
Indoor Tools & geometry Simulation output