Surrogate-assisted multi-fan ventilation of an industrial hall: thermal and tracer CFD
Simulation7 MB
Processed URANS outputs (regional temperature rise, passive tracer, mean-field sections), surrogate models, reference geometry, input dictionaries and analysis code comparing fan allocations at equal power in a normalised industrial hall. Useful for industrial ventilation design and surrogate modelling.
CC BY 4.0Free to use and share, including commercially, as long as you credit the creators.
Size
7 MB
How to cite
Li, C., Jiang, B., Hu, Y., Hu, M., & Zhao, Z. (2026). Supporting data and reference code for surrogate-assisted industrial multi-fan allocation at equal estimated power [Data set]. Zenodo. https://doi.org/10.5281/zenodo.23555930
Check the repository for the citation its authors prefer.
Details
Resource
Simulation output, Case setup, Software & tools, Geometry
College of Civil Aviation, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China; State Key Laboratory of Air Traffic Management System, Nanjing 210014, China
Air velocities measured on an HTM 03-01 grid at 1 m and 2 m below the canopy (three repeats), processed means and uncertainties, and the CAD geometry. Useful for validating CFD of ultra-clean ventilation airflow and particle entrainment.
193 steady RANS (k–ε, Boussinesq) simulations of one 8.8 × 6.1 × 3.2 m furnished room where only the positions of three supply and three return ceiling vents change. Each case gives cell-centre temperature, velocity and pressure plus boundary-patch data. Useful for training neural-operator surrogates and for studying how diffuser layout affects HVAC airflow.
Input case list for CFD runs, ML inputs and outputs, a trained neural network and an inference script for predicting room ventilation conditions, including humidity. Useful as a ventilation surrogate-modelling example.
Simulation outputs and MATLAB scripts for 192 cases of a dwelling with a façade-integrated AHU with thermoelectric heat exchange. Covers ventilation, IAQ, overheating and energy across four climates.
IndoorSimulationSimulation outputSoftware & toolsMultizone model
One-minute BMS time series covering zone temperature, CO2, setpoints and actuator signals, plus hourly electricity data, from schools, medical centres, care facilities and a sports arena, 2022-2025. Useful for ventilation and indoor air quality analysis and for data-driven HVAC control.
Laboratory office-room measurements of CO2 in the room and in supply/exhaust ducts, plus temperature, humidity, pressure, variable VAV airflow and ground-truth occupant counts. Useful for ventilation-rate estimation and demand-controlled ventilation.
From Zenodo, added 2026-11-15.
Listed there as “Supporting data and reference code for surrogate-assisted industrial multi-fan allocation at equal estimated power”. Tags proposed by AI and not yet checked by hand. Spotted a mistake? Tell the portal contacts.