Next meeting 14th UFM Meeting · 23 Mar 2027 · Bristol Save the date →
Urban Fluid MechanicsSpecial Interest Group

Wind-tunnel pressures on non-standard shapes and structures (ERIES-WENSS)

Lab 18 GB

Wind tunnel pressure maps for non-standard shapes and structures. Useful for wind load studies.

Get the data

Zenodo DOI 10.5281/zenodo.15839245
Licence
CC BY 4.0 Free to use and share, including commercially, as long as you credit the creators.
Size
18.4 GB

How to cite

Kai-Uwe, B., Martinez-Lopez, G., Péntek, M., Kodakkal, A., Goldbach, A.-K., Bitsuamlak, G., WindEEE, Birhane, T., Cormier, T., & Faranov, M. (2025). Wind Effects on Non-Standard Shapes and Structures (ERIES-WENSS) [Data set]. Zenodo. https://doi.org/10.5281/zenodo.15839245

Check the repository for the citation its authors prefer.

Details

Resource
Measurements
Method
Wind tunnel
Geometry
Single building
Topic
Wind loads & pedestrian wind
Quantities
Pressure / Cp
Year
2025
Creators
Kai-Uwe, Bletzinger; Martinez-Lopez, Guillermo; Péntek, Máté; Kodakkal, Anoop; Goldbach, Ann-Kathrin; Bitsuamlak, Girma; WindEEE; Birhane, Tibebu; Cormier, Tristan; Faranov, Maksim
Institution
Technical University of Munich; Western University; WindEEE

Related resources

  1. AIJ urban wind environment benchmark cases (A–M)

    12 parts

    The Architectural Institute of Japan (AIJ) urban wind environment benchmark suite: wind-tunnel and field data for cases A–M, from a single high-rise building and cube arrays to real districts such as Shinjuku and Niigata, many with STL geometry. Widely used to validate CFD for pedestrian-level wind and dispersion.

    Collection · 12 parts Benchmark Lab MeasurementsCase setup Wind tunnel

    Niigata, Japan · 2025 · CC BY 4.0 · Paper: Turbulent measurments of the flow field around a high-rise building ↗ +9

  2. High-fidelity surface pressure on prismatic buildings (wind tunnel)

    4 parts

    Boundary-layer wind tunnel surface pressure measurements on parametric low-rise prismatic buildings. Useful for wind load studies and model validation.

    Collection · 4 parts Lab Measurements Wind tunnel

    2025 · CC BY 4.0

  3. WindEEE downburst-like flows over buildings (ERIES-TFCA)

    3 parts

    WindEEE wind-field and aerodynamic pressure data for a CAARC high-rise building in atmospheric boundary layer and downburst-like flows. Useful for wind-load validation.

    Collection · 3 parts Lab Measurements Wind tunnel

    2026 · CC BY 4.0

  4. Thunderstorm wind loads on a low-rise building model (ERIES-ProMoTWA)

    2 parts

    Non-stationary pressure and velocity measurements on a low-rise duo-pitch building model in the WindEEE Dome under ABL, downburst and combined winds. Useful for wind-load studies of non-synoptic winds.

    Collection · 2 parts Lab Measurements Wind tunnel

    2026 · CC BY 4.0

  5. CWE2000 cube flow validation (Silsoe)

    Full-scale surface pressure and velocity measurements on the 6 m Silsoe cube in natural wind, with wind-tunnel comparisons. Used as the CWE2000 validation case for CFD; time series and compiled means and variances are available.

    Benchmark Field MeasurementsCase setup Wind tunnel

    2002 · Paper: A 6 m cube in an atmospheric boundary layer flow (parts 1 and 2) ↗

  6. Wind-tunnel pressures on a high-rise building (Politecnico di Milano)

    16 GB

    High-resolution wind tunnel pressure data for a high-rise building at Politecnico di Milano. Useful for wind load studies.

    Lab Measurements Wind tunnel

    2020 · CC BY

All 36 resources on pedestrian wind & wind loads →

From Zenodo, added 2026-11-07. Listed there as “Wind Effects on Non-Standard Shapes and Structures (ERIES-WENSS)”. Tags proposed by AI and not yet checked by hand. Spotted a mistake? Tell the portal contacts.