Indoor dispersion sensor-grid measurements for LES validation
Field265 MB
Raw sensor-grid concentration data and metadata from indoor dispersion experiments used to quantitatively validate LES of indoor dispersion. Useful as validation data for indoor dispersion models.
CC BY 4.0Free to use and share, including commercially, as long as you credit the creators.
Size
265 MB · 37 files, 265 MB
How to cite
Kuula, J. (2025). Sensor grid data for the research article "Quantitative validation in indoor dispersion modeling; comparing LES results with experimental measurements [Data set]. Zenodo. https://doi.org/10.5281/zenodo.14671671
Check the repository for the citation its authors prefer.
Size-resolved particle concentration time series (6 s, 1 s for cough) at 1-4 m from a cough source and culturable E. coli data at several relative humidities in a ventilated room-scale chamber. Useful for validating indoor aerosol dispersion, deposition and ventilation removal models.
Raw full-scale measurements of air velocity, temperature and particle concentration at breathing height in a mixing-ventilated test room, under varied exhalation flow velocities and directions. Useful for validating indoor CFD of airborne particle transport.
About 150,000 records of CO2, temperature, humidity and pressure from IoT devices spread across an office workplace. Useful for studying ventilation adequacy and infection risk.
Particle concentration measurements in a 40.8 m3 hospital room with two breathing thermal manikins (patient and health worker), comparing air cleaner positions, mechanical ventilation and combinations at 3.67 ACH. Useful for validating indoor dispersion and airborne transmission models.
About 73,000 observations of CO2, temperature and humidity from low-cost SCD30 nodes in six classrooms at two schools (Vilafamés and Vall d'Alba), May 2020 to June 2021. Useful for assessing classroom ventilation under COVID-19 measures.
CUDA Python finite-difference solver of compressible Navier-Stokes with heat and CO2 transport and periodic nasal breathing of a seated person in a non-ventilated 5.75 x 2.55 x 2.85 m room. Useful for studying thermal plumes, exhalation jets and indoor aerosol/CO2 spreading.
From Zenodo, added 2026-11-15.
Listed there as “Sensor grid data for the research article "Quantitative validation in indoor dispersion modeling; comparing LES results with experimental measurements"”. Tags proposed by AI and not yet checked by hand. Spotted a mistake? Tell the portal contacts.