Not stated: check the repository before reusing the data.
How to cite
National Institute of Technology Raipur. (2020). Indoor environment and radiators [Data set]. https://www.urbanfluidmechanics.org/data-portal/indoor-environment-and-radiators/
Please also cite the publication below that describes it.
This study focuses on the numerical analysis by means of computational fluid dynamics of the variation in the overall comfort in a small office/room, due to the presence of heat-generating and non-heat generating elements.
Simulation outputs and MATLAB scripts for 192 cases of a dwelling with a façade-integrated AHU with thermoelectric heat exchange. Covers ventilation, IAQ, overheating and energy across four climates.
IndoorSimulationSimulation outputSoftware & toolsMultizone model
193 steady RANS (k–ε, Boussinesq) simulations of one 8.8 × 6.1 × 3.2 m furnished room where only the positions of three supply and three return ceiling vents change. Each case gives cell-centre temperature, velocity and pressure plus boundary-patch data. Useful for training neural-operator surrogates and for studying how diffuser layout affects HVAC airflow.
Complete case set-ups for two solvers, the shared 2.66M-cell mesh, converged 3D fields, digitised experimental profiles and post-processing scripts for an underfloor air-distribution room with heated manikins. Useful for validating buoyancy-driven indoor CFD.
Steady RANS velocity field (cell-centred, VTK/VTU) for an empty 8 x 7 x 3 m room with a ceiling supply and a ceiling extract at 0.36 m3/s. It is the ground truth for the Open AirField benchmark, which tests reconstruction of room airflow from sparse point measurements.
OpenFOAM cases and scripts reproducing classic indoor airflow validation experiments (Wang and Chen 2009; Zhang et al. 2007) with several turbulence models, plus data-centre efficiency cases. Useful for validating indoor RANS models.
3D models and measurements of air speed, air temperature and server power at 1-10 s intervals in a small server room, under idle to 100% load scenarios. Useful for validating CFD of data-centre cooling airflow.
From , added 2026-11-15.
Listed there as “Indoor environment and radiators”. Tags proposed by AI and not yet checked by hand. Spotted a mistake? Tell the portal contacts.